CyberPower PowerPanel Manual do Utilizador descarregar pdf (Página 11)

Note: If hibernation is disabled or not available a shutdown will begin after the

warning.

See also Low Runtime Remaining and Battery Backup Overloaded for more

information.

*Note: This is not available for all battery backup models.

Voltage

This feature shows current AC power voltage and the normal voltage rating of your

battery backup. If AC utility power voltage fluctuates beyond the acceptable range

your battery backup will switch to battery mode to ensure your equipment receives

safe voltage.

Note: Wider voltage range exposes your equipment to a greater risk of damage. We

recommend caution while configuring the maximum and minimum value.

Note: Narrower voltage ranges will result in more frequent use of battery power.

Note: This is not available for all battery backup models.

Self-Test

You can test to verify your battery backup will operate normally using the self-test

process. At the Self-Test screen you can start the self-test. When you click on the

"Initiate Self-test" button the battery backup will switch to battery mode to supply

power to your equipment which tests the functionality of the battery. When a self-test

ends the result will be displayed on the screen.

If the self-test fails there may be some problems such as:

• The battery backup does not have enough power.

• The battery backup has less runtime than recommended settings.

Note: It is strongly recommended to run a self-test with some equipment plugged into

the battery backup. This will improve the measurement of battery power and runtime.

Therefore, after self-test, you can expect more precise figures of these two

parameters.

Note: This is not available for all battery backup models.

1 2 ... 6 7 8 9 10 11 12 13 14

Sem comentários

CyberPower PowerPanel Manual do Utilizador Página 11