CyberPower PDU15SW8RNET Manual do Utilizador descarregar pdf (Página 21)

PowerPanel™ Business Edition

UPS/Status page

Input

z Status: Displays the present status of the utility power supplied to the UPS.

 Normal: The voltage and frequency of the utility power is normal.

 Blackout: There is no utility power being supplied to the UPS and it is supplying battery power to

connected equipment.

 Over Voltage: The utility voltage is higher than the high voltage threshold and the UPS is using the

battery to supply power.

 Under Voltage: The utility voltage is lower than the low voltage threshold and the UPS is using the

battery to supply power.

 Frequency Failure: The frequency of the utility power is out of tolerance and the UPS is supplying

battery power with a fixed frequency.

 Wiring Fault: The UPS has detected a wiring fault in the outlet it is plugged into.

z Voltage: The voltage of the utility power supplied to the UPS.

z Frequency: The present frequency of the utility power supplied to the UPS.

Output

z Status: Displays the present status of the output power the UPS is supplying to connected equipment.

 Normal: The output power is normal.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Sem comentários

CyberPower PDU15SW8RNET Manual do Utilizador Página 21