CyberPower PDU15SW8RNET Manual do Utilizador descarregar pdf (Página 33)

PowerPanel™ Business Edition

Client computer is printed in gray when the communication is not established

The equipment detailed settings and descriptions are as follows:

z #: Indicates which power outlet of the UPS is supplying power to the connected equipment. Use the

Outlet Preview picture to verify the equipment is plugged into the correct outlet.

z Bank: The bank type of the power outlet on the UPS, e.g. NCL, CL or Surge.

z Name: The name of the equipment. A connected computer with PowerPanel

Business Edition Client

installed has an icon marked with a "P". Generic equipment does not have the icon marked with a “P”.

z Location: Where the power equipment is located.

z Contact: Who to contact about this equipment.

z IP Address: The IP address of the Client computer. This allows users to enter the Client’s IP address or

pick a device address by using the pull-down to show the device list. Clicking the refresh button (an icon

with the rotating arrow) causes the Agent to search again for all Client computers on the local area

network and update the results in the device list.

Agent searches all Clients on local network.

Power

(The content in this section is only applicable to the Client.)

The Client can interact with a UPS or a PDU through a network interface. If the UPS has no remote

management card, the Agent can be installed on a single computer which is using a USB or a serial

connection directly to the UPS in order to establish the network connection to the Client.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 99 100

Sem comentários

CyberPower PDU15SW8RNET Manual do Utilizador Página 33