CyberPower PDU15SW8RNET Manual do Utilizador descarregar pdf (Página 36)

PowerPanel™ Business Edition

The Client searches the device with the least uptime to be a default power device after an installation.

Change to another device if the default one is not supplying power to the Client computer.

z Connected Outlet: Indicates which power outlet of the power device is supplying power to the Client

computer. Use the outlet preview to verify whether the Client computer is connected to the proper outlet.

The Identify button is only visible after the Client has established communication with the PDU; the

identification function helps to identify which outlet has the connected equipment. The PDU will blink the

outlet number on the LCD screen to verify the actual connection on the PDU matches when

the Identify button is pressed.

Move the cursor over the target address to display details about the device

Clicking the refresh button to search all devices again on the local network

z Auto Configure: Any time the IP address of the power device is changed, the Client will lose

communication with the power device. If this option is checked, the Client will scan the network and

automatically acquire the new IP address of the power device.

z Prevent Early Off: When the Client detects that the PDU outlet which is powering the Client computer, is

going to be shut off, the Client will prepare to shut down the hosted computer. If the necessary shutdown

time of the Client computer is more than the delay off time of the outlet, the Client will stop the computer

shutdown and signal the PDU to cancel to outlet turn off.

z Status: Displays the status of communication with the power device.

 Connected: The Client is connected to the power device.

 Unreachable: The Client cannot communicate with the power device. It may be due to incorrect

settings such as the SNMP community or Secret Phrase, the wrong IP address, or a network

problem.

 No address assigned: The Client does not establish the communication with the power device.

The communication has been cancelled by Client or power device.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Sem comentários

CyberPower PDU15SW8RNET Manual do Utilizador Página 36