CyberPower PDU15SW8RNET Manual do Utilizador descarregar pdf (Página 73)

PowerPanel™ Business Edition

z UPS Type: The type of the UPS. e.g. On-Line, Line Interactive or Sinewave Line Interactive.

z PDU Type: The type of the PDU. e.g. Monitored or Switched.

z Power Rating: The Volt-Amp rating (VA) and power rating (Watts) of the UPS.

z Voltage Rating: The output voltage rating (Volts) of the UPS.

z Frequency Rating: The output frequency rating (Hz) of the UPS.

z Battery Replacement Date: The date that the batteries were last replaced. This should be set at the

time of battery replacement. If this date has not been set, it is recommended that this date should be set

immediately.

z External Batteries: The amount of external battery packs connected to the UPS.

z Outlets: The amount of outlets on the PDU.

Device Operations

Center provides management functions for a UPS/PDU.

Computers on Outlets

z Shutdown/Restart: A shutdown or restart can be initiated on a computer with either Agent or Client

installed by going to Shutdown/Restart in Computers on Outlets. A window will list the computers which

can be shutdown or restarted. Clicking “X” will remove that computer from the list and they will not be

shutdown/restart.

A confirmation window lists computers able to be shutdown

Power Control

z Power Off: Click Power Off and a confirmation window will appear. Decide whether to perform an

immediate or a sequenced power off then click OK to begin. When a UPS or a PDU initiates a

sequenced power off, computers connected to the UPS/PDU that have Agent or Client installed will

initiate shutdown prior to the sequenced power off.

Note: An immediate power off will likely result in connected computers losing power.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 99 100

Sem comentários

CyberPower PDU15SW8RNET Manual do Utilizador Página 73